Wood pallet production process

Production process of wooden pallet of HD Asean Co., Ltd. is implemented through specific stages, precision and quality inspection to ensure the quality of each stage, to produce large quantities of wood pallet and minimize errors. in production, before delivery to the customer.
Step 1: Enter Roundwood (Raw Material)
Step 2: Saw the wood (saw pallet)
Step 3: Dry, sterilize, demolish
Step 4: Woodblock
Step 5: Cut the ends of the wood
Step 5: Scrub the wood
Step 6: Close the finished product
Step 7: Save the finished product

Introduction to wooden pallet production

Step 1: Enter the Roundwood Glue
Wood is made from planted acacia wood, which is stored to protect against termites.
Inspection of input quality: Before being stored in the warehouse, timber is checked for quality to remove unsatisfactory timber such as broken wood, porous wood …

Step 2: Saw the wood
The wood is cut into each bar according to the size of each pallet
Inspection of the quality of sawmilling into gas: Check to remove the errors in the sawing process such as: missing wooden bar, dead wood stick …

Step 3: Dry and sterilize, dehull.
The slabs are stacked with aperture and put into the industrial oven to dry the sterilization for wooden pallets that need to be sterilized or fumigated. Or covered and smoked to disinfect wooden pallets by smoking.

Step 4: Wood splatter
The wooden planks are smooth three sides of the upper and two sides. To help prevent the pallet from being roughened, when shipping, it will not scratch.
Quality inspection of wood slabs: Checking and removal of defects in the suturing process such as blunted wooden sticks due to blunted knives, wooden splinters caused by woody eyes while projecting.
Step 5: Cut the two ends of the wood.
Cut the two ends of the timber according to the size of each pallet. Make the size pallet for wood.
Cut quality inspection: Check and remove broken woods due to cutting process such as wood bevelled head, broken wood head …
Step 6: Rub the wood
Sand the wood strips to remove the fibers on the remaining wood sticks from the front stitches so that the wood is beautiful and does not scratch the goods when using pallets.
Scrub quality check: Check and remove the errors generated during sanding such as scrub marks, not yet ran.
Step 7: Close the product.
Finished wooden pallet made of wood. Nails used to make wooden pallets are industrial torsionally threaded studs that allow the joists to be firmly fixed, and to reduce the problem of nail loss.
Quality Inspection: Final product pallet was checked. Check for defects caused by the closing of the finished product and complete inspection and removal of defective products of all stages before being stored in the finished product.

Step 8: Save the finished product.
Wooden pallets are stored in standard stock, temperature and humidity standards. The store is dormant and clean.

Some pallet images after completion

HEAD OFFICE: Lane 109 Truong Chinh Phuong Liet Ward – Thanh Xuan District – Hanoi
Office – HCM: 858 / 20A QL1A, Binh Tri Dong A Ward, Binh Tan District, Ho Chi Minh City
Tel – HANOI: 024.3375.66.99 – Hotline: 0964.60.44.11
Tel – HCM : 028.6681.00.01 – Hotline: 0978.30.53.78
Email: info@hdasean.com – hungdat.co.vn@gmail.com
Website: http://dongthunggo.com – http://hdasean.com – https://packingvietnam.com